Software- LaserCut software comes standard with every Laser system sold by Rapid Concepts, AutoCad & Corel Draw can also be used.
Training- Training is provided with the Laser and are designed for ease of use.
Metal- The Laser will not cut metal as the laser would have to be 10 times larger (400w or more).
Difference- The differences between our Engraving laser & Cutting laser is 1- The focus lens on the Engraver is 50mm, the Cutter laser has a focus lens of 63.5mm , this inproves the cutting speed and the finished edge quality. 2- The cutting lasers normally have a larger 80w laser, the Engraving Laser normally has a 60w laser. 3-The Engraving Laser is geared to travel fast.
Computer- The Laser can be run without being connected to any computer by loading a file onto the laser by using a USB flash stick, a computer can also be used to down load file direct to the laser by a USB cable.
Safety- The laser is a class 4 laser and is interlocked to prevent contact from the laser beam.
Material that can be Cut- Wood, Plastic, Arcylic, Cloth, Leather, Paper, Cardboard, Fibre Glass, Rubber, Cork to name a few.
Material that can be Engraved- Wood , Plastic, Acrylic, Glass, Coated Metals, Ceramic, Cloth, Leather, Marble, Melamine, Paper, Mylar, Anodized Aluminum, Rubber, Plywood, Fiberglass, Stainless Steel, Tile, Cork to name a few.
Air Assist- Air Assist gives you a better finish when egraving & cutting. Air Assist comes with every laser supplied by Rapid Concepts. Air Assist comprises of an air pump and plumbing to blow air onto the area being engraved or cut. It also blows away fumes and cools the material to prevent fire.
Standard- Every laser comes with Water Chiller, Honey Comb cutting table, Air Assist & Training.
Opional Extras- Red Dot Pointer, Filtration system, Laser upgrade from 60w to 80w

Back to Top